| Honda XR 600 r 1997 | ||
| Valve clearance (Cold engine =Below 35C) | ||
| Intake | 0,10 mm | |
| Exhaust | 0,12 mm | |
| O-Ring | ||
| Valve adjust hole cover (39,5x2,6) | 91352-MG2-792 | |
| Cranshaft hole cap (27x2) | 91305-KF0-003 | |
| Timing hole cap (13,8x2,5) | 91303-337-000 | |
| Torgue specifications | Nm | |
| Valve adjust screw locknut | 25 | |
| Valve adjust hole cover | ||
| Through 1997 | Not Specified | |
| 1998 - on | 15 | |
| Cranshaft hole cap | ||
| Through 1997 | Not Specified | |
| 1998 - on | 15 | |
| Timing hole cap | ||
| Through 1997 | Not Specified | |
| 1998 - on | 10 | |